2.6 GPM / 10 LPM – 12V Solar Hot Water Pump – Can be run by a 10W solar panel – With Brass NPT Threads

August 4, 2013 - Comment

TS5 SOLAR DC CIRCULATION PUMP Application The TS5 solar DC pump can be used for most circulation pump applications without connection to the power grid. Highly efficient, the TS5 can be connected directly to a photovoltaic panel and is characterized by its small size, high efficiency, and extreme low power consumption. The long life brushless

TS5
SOLAR DC CIRCULATION PUMP

Application
The TS5 solar DC pump can be used for most circulation pump applications without connection to the power grid. Highly efficient, the TS5 can be connected directly to a photovoltaic panel and is characterized by its small size, high efficiency, and extreme low power consumption. The long life brushless motor technology provides maintenance free and quiet service life. This pump is perfect for single family home thermal solar systems or any circulation pump application where conventional power is not available.

ODC brushless motor with energy efficiency technology by micro processor

Features
Low power consumption. Soft start at very low in-rush current, good convenient working directly with PV panel
m Durable permanent magnetic rotor/impeller and fine ceramic shaft
m Advanced magnetic drive technology for static-impeller, without any leakage for ever
m Long life brushless pump, ideal life for 30000 hours
m Heavy duty work, can sustain continual 24 hours’ work
m Automatic overload protection
m Automatic over-temperature protection
m Automatic dry-running protection
m Low or no maintenance

Specifications
Voltage: 8V-24V DC (Standard:12V DC)
Max Flow Rate: 10 L/Min – Max Water Head: 2.3M
Brass 1/2″ NPT male Inlet/Outlet
Max system pressure: 10Bar
Max working temperature: 110°C (230° F)
Min start-up power consumption less than 2 Watt
Low noise: 45dB far from 1m distance

Areas of use
Hot Water Circulation
Radiant Floor Heating
Solar Applications
Liquid Transfer
General Purpose Pumping

Materials of Construction (Wetted Parts)
· Hi-Temp Ryton Plastic- PPS (food grade)
· Brass Inlet/Outlet
· Viton “0” Ring
· Hi-Temp Ryton (PPS) Impeller
· Ceramic Ferrite Magnet

Product Features

  • 6V~24V DC – Can be directly powered by a 10W solar panel
  • 1/2″ male NPT Inlet/Outlet – 7′ 6″ Max Head
  • Max system pressure: 145psi – Max working temperature: 230° F
  • Automatic overload protection – Automatic temperature protection
  • Can sustain continual 24 hour work for 30000 hours

Famous Words of Inspiration...


Powered By AMZ QuoteCash

Comments

Handydoc says:

Good PV powered pump for solar water heater I recently replaced a burned-out Grundfost 110 volt pump with a 10PV Topsflo for my (25 year old?) solar water heater system. I ordered it due to the good price ($56.67), its “food grade” (?) material and brushless motor. When received, it looked somewhat flimsy and too small (the ad picture showing gold-color housing misled me to think it was made of brass). Being “green”, I wanted to give it a try.I used 2 five-watt PV panels (“Instapark® 5W High-Efficiency Mono-Crystalline Solar Panel”, $22.95 each, which are better priced at that time than one 10w panel!) and later removed one of them since it runs adequately on one. Since I no longer need the controller/sensors (the pump and the panels work in harmony together, only when the sun is up), I cut the wire from the solar panel sensor and used it as power line between the PV panel and the pump without having to run new wire from the roof down. I position the PV panel so that it would only power the pump when the sun is high…

Anonymous says:

Connected to 3 15watt solar panels for a total of 45 watts of 12 volt power. This would not power the the pump

Anonymous says:

A total garbage it worked only for one day and for no reasons at all it quit I tock to a repair shop I was told because it is a sealed unit can not be repaired .I have been wondering of what is the return policy and how long it will take to get a replacementThank youSam

Comments are disabled for this post.